Knowledge

9 résultats trouvés avec la recherche : UT

Early detection of high temperature hydrogen attack using the ultrasonic full matrix capture and advanced post-processing methods

This scientific article early detection of high temperature hydrogen attack using the ultrasonic full matrix capture and advanced post-processing methods is published in the NDT & E International, Volume 130, September 2022, 102676. Frederic Dupont-Marillia | Nucleom, 8695 rue Pascal-Gagnon, Montreal, Quebec, Canada Joseph W. […]

Live imaging using TFM in a 30-inch forged steel block

Live imaging using TFM in a 30-inch forged steel block article presented by Frederic Dupont-Marillia, Mohammad Jahazi and Pierre Belanger during the ASNT Annual Conference 2019 is now available in The American Society for Nondestructive Testing Digital Library. For a little sneak-peak, read the abstract […]

Design and Optimisation of a Phased Array Transducer for Ultrasonic Inspection of Large Forged Steel Ingots

Frederic Dupont-Marillia, Mohammad Jahazi, Serge Lafrenier, Pierre Belanger | Department of mechanical engineering, École de technologie supérieure, 1100 rue Notre-Dame Ouest, Montreal, Quebec, Canada Congratulations to Frederic Dupont-Marillia, R&D Project Manager at Nucleom & Post Doctoral Researcher at PulETS Laboratory, for his article publication in the Journal […]

ultrasonic guided wave

Ultrasound tomography in bone mimicking phantoms: Simulations and experiments

Timothe Falardeau and Pierre Belanger | Department of Mechanical Engineering, Ecole de Technologie Superieure, 1100 Notre-Dame Street West, Montreal, Quebec H3C1K3, Canada Congratulations to Timothé Falardeau, Project Manager at Nucleom, for his article publication in the Journal of the Acoustical Society of America (Vol. 144, No.5) DOI: […]

Types d'essais non destructifs TOFD

Types of Non-Destructive Testing

The different types of non-destructive testing are often complementary. As a result, we can exploit the advantages of combined techniques. Non-destructive testing (NDT) is a combination of various inspection techniques used individually or collectively to evaluate the integrity and properties of a material, component or […]